$1,685.00
This 2 hp motor with variable speed controller is used in Beaumont’s classic KMG 2×72 belt grinders / sanders.
- 2 hp motor NEMA 56H foot mount
- 3 phase totally enclosed fan cooled (TEFC) motor
- 3450 RPM
- 5/8″ shaft
- VFD controller accepts either single phase 115 volt power or single phase 230 volt power, and delivers 3 phase 230 volt power to the motor.
- When running on 110V, it will produce 1.5 hp. When running on 220V, it will produce the full 2 hp.
- VFD will run on GFCI protected circuits, and includes four internally selectable GFCI sensitivity settings for improved performance.
This 2 horsepower (2hp) motor with variable speed controller is used in Beaumont’s classic KMG 2×72 belt grinder / sander.
-
- 2 hp motor
- 3 phase / 60 HZ
- 3450 RPM
- 5/8″ shaft
- 2 HP VFD NEMA-4X /IP-65 rated for complete dust-tight, water-splashing, and light waterjet protection during operation.
- VFD controller accepts either 115 volt single phase power or 230 volt single phase power
- When running on 115V, it will produce 1.5 hp. When running on 230V, it will produce the full 2 hp.
- Standard NEMA 56H frame with feet for base mounting. For a face-mount 2hp motor and controller click here. Motor mounting hardware not included.
Includes motor, VFD controller, on/off switch module, steel mounting bracket for VFD, cable from motor to controller, 1/4-20 screws with nuts to attach VFD to mounting bracket, 5/16 x 3/4 hex screws to attach mounting bracket to bench or subplate (subplate not included), cable glands and wire connectors.
Does not include power cord, or subplate / base plate. Click here for a 115 volt power cord. Click here for a 230 volt power cord.
Set Up instructions for variable speed motor and controller